
How Does a Paraglider Fly? Lift, Angle of Attack and Glide Ratio Explained
A paraglider has no engine, no rigid frame and weighs only a few kilograms, yet it can carry a pilot for hours and hundreds of kilometres. This first post in our paragliding theory series explains how: how a fabric wing holds its shape, where lift comes from, what angle of attack means and how far a paraglider can glide.
Important: theory helps you understand what the wing is doing, but it does not replace training. Learn to fly with a registered school and an instructor.
The short answer
A paraglider is a glider. It is always descending through the air around it, the same way a ball rolls down a slope. Gravity is the engine: it pulls the wing and pilot forward and down, and the wing's shape turns some of that movement into lift. Pilots stay up for hours by flying in air that is rising faster than the wing sinks, such as wind pushed up a slope or a thermal. Part 3 of this series covers that.
The wing: how fabric holds its shape
A paraglider wing is called a ram-air wing. It is made of a top and a bottom surface of thin nylon fabric, joined by ribs that divide it into a row of cells. The ribs are cut in the shape of an aerofoil, the curved profile of a wing.
At the front of the wing, along the leading edge, each cell has an opening. As the wing moves forward, air rams into these openings and pressurises the cells. The pressure inside is higher than the air outside, so the fabric is pushed out into the aerofoil shape and the wing becomes firm. Holes in the ribs, called cross-ports, let air flow between the cells so the pressure evens out across the wing.
Leading edge: the front of the wing, where the cell openings are.
Trailing edge: the back of the wing. The brake lines pull it down.
Chord line: an imaginary straight line from the leading edge to the trailing edge.
Lines and risers: dozens of thin lines carry the pilot's weight to the wing and hold it in shape. They join at the risers, which clip into the harness.
No air pressure means no wing. That is why a paraglider has to keep moving through the air to stay inflated, and why the angle of attack (below) matters so much.
Where lift comes from
The curved shape of the wing and its angle to the oncoming air turn the airflow downward as it passes. Pushing air down pushes the wing up, which is Newton's third law at work.
You can describe the same thing with pressure. Air flowing over the curved top surface speeds up and its pressure drops, while the pressure under the wing is slightly higher. The difference in pressure between the bottom and the top pulls and pushes the wing upward. These are two ways of describing one effect, not two separate sources of lift.
Lift grows with the size of the wing, the density of the air, the angle of attack and, most of all, speed: twice the airspeed gives roughly four times the lift. That is why a wing needs a minimum speed to fly.
The forces on a paraglider in flight
Three forces act on a paraglider and its pilot in flight:
Weight: gravity pulling the wing and pilot straight down. For a glider this is the engine.
Lift: the force the wing makes at 90 degrees to the airflow.
Drag: air resistance from the wing, the lines and the pilot, pulling back along the airflow.
Because the glider is always descending slightly, the airflow comes from slightly below the horizon. Lift is tilted forward a little, and that forward tilt is what keeps you moving. In a steady glide, lift and drag together make one force that points straight up and is exactly as strong as your weight. The forces are balanced, so you glide at a constant speed.
A paraglider has no thrust force. If you want to fly faster, you have to convert height into speed by gliding more steeply, for example with the speed bar.
Angle of attack: the angle that matters most
The angle of attack is the angle between the chord line of the wing and the oncoming airflow. It is not the same as the angle of the wing to the horizon. On a paraglider the basic angle of attack is set by the length of the lines, and the pilot changes it with two controls:
Brakes: pulling the brake lines lowers the trailing edge. This increases the camber and the angle of attack and slows the wing down. Pulling one brake more than the other turns the wing.
Speed bar: a foot bar that shortens the front risers. This lowers the angle of attack and makes the wing fly faster.
Hands up, with no brake and no speed bar, the wing flies at trim speed. For most paragliders this is around 36 to 40 km/h and gives the best glide in still air.
Paragliders have two limits, one at each end of the range:
Too high, the stall: if the angle of attack gets too high, usually from too much brake, the air can no longer follow the curved top surface and breaks away. The wing loses most of its lift and stops flying forward.
Too low, the collapse: if the angle gets too low, for example on full speed bar in turbulence, the pressure holding the front of the wing open drops. Part of the leading edge can fold under. This is a collapse. Modern wings, especially beginner wings, are designed to recover from collapses on their own, but they are why you fly actively in rough air.
This is the big difference between a paraglider and a rigid wing: the wing only keeps its shape while the angle of attack stays in the normal range.
Glide ratio: how far can a paraglider fly?
The glide ratio tells you how many metres the wing flies forward for every metre it descends in still air. A wing with a glide ratio of 8 : 1 flies 8 km forward for every 1 km of height it loses. The glide ratio is the same number as the wing's lift-to-drag ratio.
School and beginner wings (EN-A and low EN-B): roughly 8 to 9 : 1.
High-performance cross-country and competition wings: 11 : 1 or more.
Sink rate: a typical paraglider descends at roughly 1 to 1.3 metres per second in still air.
Within the wing's certified weight range, a heavier pilot flies faster and sinks faster, but the glide ratio in still air stays about the same. Every wing has a weight range for a reason, so fly within it.
Try it: glide calculator
The glide ratio of the wing is measured through the air, but you care about the ground. Wind changes the picture completely:
Headwind: your speed over the ground drops, but you still sink at the same rate, so you cover less ground. A 37 km/h wing into an 18 km/h headwind covers only about half the ground it would in still air.
Tailwind: your speed over the ground goes up and you glide further.
Sinking air: descending air adds to your sink rate and shortens your glide. Rising air does the opposite.
In the Cape: the Signal Hill example
Take Signal Hill, with a launch around 350 m above Sea Point. In still air a beginner wing with an 8.5 : 1 glide could cover about 3 km before reaching sea level.
Now add a 25 km/h sea breeze blowing onto the hill. At a trim speed of about 37 km/h, the wing moves forward over the ground at only about 12 km/h, and its glide over the ground shrinks to under 3 : 1. At 35 km/h, the maximum wind allowed for take-off and landing on Signal Hill, you would almost hover in place.
This is why wind limits exist. A pilot who launches in wind faster than their wing can fly forward can be blown back over the hill, where there is nowhere safe to land.
Check yourself
Ready to feel it for real? Book a tandem flight from Signal Hill, or start your full paragliding licence course in Cape Town with Sky Safari. Visiting pilots can find the main flying sites in our Western Cape site guide.
Figures in this post are typical values for modern paragliders. Check your own wing's manual for its trim speed, glide ratio and weight range. Information checked October 2026.
Comments